How to hardwire speaker box into old truck? - 1
Added (1). Ok so i have a 86 Ford ranger that is a pos and so the radio doesn't work, but i have this old speaker box with a aux cord that is meant to be plugged into a wall outlet so i was trying to figure out a way to hard wire it into the truck because i only have one cigarette lighter socket and don't want to have to have it permanently occupied by a converter. Any help would be appreciated thanks.
Ford ranger 92 v6 4.0
My car is kia carens CRDI 2.0 automatic.
The problem is when from a full stop, The car moves but no engine response when stepping on the accelerator pedal. The engine will only respond after a few moment or probably 3 to 5 seconds.
Another problem is sometimes it loses power on the second gear when Gear 1 is shifted up from or before the red line, resulting no acceleration or in a constant speed - and will shift down to gear 1.
Mileage is already 108000 kms
Newly changed timing belt
New atf fluid
Change oil will be done by mext month.
Added (1). 2008 model
Added (2). New fuel filter
Added (3). Any nonsense answers will be automatically flagged down just like member "Monitor".
Added (4). I brought the car to a mechanic and they managed to fix it. Oh and by the way, those members who answered (one guy in multiple accounts) didn't helped me a lot. I just can't keep laughing why they were keep answering where they don't know cars. Kia? Oh please. I only bought a second hand kia because it was only a home service for my veterenary clinic. I own 4 cars not only kia. I have Toyota Fortuner 2016, Ford Ranger 2014, Mitsubishi Montero Sport (not the one that has SUA) and a Kia Carens.
So i took my truck to my mechanic and he said there was a miss fire in cylinder 4 he tried to see if it the plugs and coils and what not but he then said I needed a valve job and it would be $2500 is that a reasonable price? What should I do? Any advice?
2003 ford ranger clutch issues will slave cylinder make clutch not disengage? - 1
Hi guys first i want to thank you for all the help that i can get i have a 1999 ranger 4.0 v6 2wheel drive with manual transmission, today i drove to my dads house 5 minute away, when it was time to go back home i start the truck put it in reverse and i was able to move it back a little than it shut off. I try to start the truck again it shuts off immediately, i try it a few times and it kept doing the same. I know i have a leak on my valve cover gaskets do you guys think that might be the problem? I just bought the truck and the old man that sold it to me told me that he actually had to replace the spark plugs almost every 3 to 4 months because they were getting oil and it after a while the truck had problems to start. Does that sound like something that it could happen? You guys think that might be the problem? Please i need help i need to get my truck fix as soon as possible.
Hey guys and girls I had an idea and though I would ask you people and see if it's a possibility for me to to convert my 1998 xlt ford ranger 4wd 4.0l v6 into a ford raptor like can I put a ford ranger grill and lights on my truck or what can I do for my truck to look like a ford raptor in a way
2000 ford ranger 3.0 engine won't start after changeing coil pack and spark plug wires? - 1
I currently have them on a 1997 dodge ram 1500. They are 16 inch rims. But I don't know if they'll fit. The ranger has 15 inch stock rims on it as of right now
None of the lights work, lock buttons won't work, absolutely nothing works. I tried jumping it and that didn't work. The truck doesn't make the clicking noise when i try to start it. I know nothing about cars.
Added (1). I just want a general idea of what could be wrong. I don't like going to mechanics without a vague idea of what could be wrong. I've had mechanics do a lot of stuff that didn't need to be done and it costed way to much