I put about 3,360lbs-3,800lbs in the bed sometimes. But very very little and very short distances. Just a question when ever the load is loaded the airbags squash down. How do they do that? Like where does the air go? They turn small. And when the load is off they go back. I'not just afraid they will pop or something.
91 Ford F150 4.9 inline six. Need to know the size of the crank shaft pulley bolt so I can turn over it by hand. There's a flat spot on the fly wheel and I can't take all my tools with me.
My dad owns the truck but I drive it frequently. A few months ago we noticed a knocking sound and there were issues with accelerating once you hit 50 mph. After having it looked at the mechanic temporarily fixed the issue. We still don't go more than 55 mph and never use the freeway.
Anyway. To me (at times) it seems as if the truck runs louder than it should. On start up it's a really loud roar and whilst driving it sounds as loud as an 18-wheeler. I don't drive it until it's warmed up so I don't think it's a cold engine then again, as you may tell, I don't have much knowledge on trucks/cars. Any help or theories is greatly appreciated.
Ford F-150 with either ecoboost v6 or the v8 or the chevy Silverado with v6 or v8 engines.
Which brand or truck has better reliability? I hear mixed reviews on both makes and like both.
I will be looking for a truck that's sade comfortable ride decent has as far as trucks go and reliability. Won't need to fix or breakdown/ in shop often with regular Maintenance.
So in your opinion which truck has better overall reliability and is longer lasting?
I will be towing small POp up campers and Using the bed for firewood but also using the truck for the family
I have a 1990 Ford F-150 and it is in terrific shape. Not any rust on it except for a layer of on the hood. I don't mind it, but I must admit the brown is jarring when the truck is sky blue. So how do I go about removing it? I heard sandpaper will do the trick. So if I plug in my hand sander and go to town on it, will I see results? Also, I plan to repaint the hood. What primer should I get? And what paint brand do you prefer? Any and all help is appreciated!
I Have a 2000 Ford F150 its theV8 5.4L triton engine and it currently has the stock air intake on it. I just bought a k&n oem replacement filter for the higher air flow than the paper filter. Is there any mods i can make to the stock intake to improve air flow and just gain a few ponies or anything at all. I don't have $300 to spend on a aftermarket kit just yet. Any pointers would be very helpful guys.
, it says h4 and h13 which one is it and why can't i get one from auto zone orileys or pep boys where do i get one? I heard maby car audio joints has one long white exterior stick, two clear inner tubes and a white ball inbetween them. Goes in 2004 ford f150
1984 Ford F150 starts [when cold] but only stays running for minutes and dies, then won't restart for a bit?
Dose a 1997 ford f150 4.2 starter motor fit on a 1997 ford f150 4.6?
I know I have to call around for quotes, but I'm just curious what I can expect (approx)
- I have a G
- I'm a 21 year old male
- I completed driving school with Young Drivers
- I have a clean driving record and have been driving (as a secondary driver on my moms car) for over one year
- I will be driving a Ford F150
What can I expect?