In my crown vic I picked up a used ring gear and pinion and both were in good shape so I swapped in them in place of my stock gears I used the same bearings and factory shims just a gear swap no overhaul since it wasn't needed now I got it all together and there's a noise coming from the rearend its not exactly a whine but the only thing i'm unsure of was setting the pinion. Would that cause a noise?
I bought a used Ford Crown Victoria that originally a police car about a year ago from this dealership that repainted it with a brand new color. I have some marks on the car and I want to use the exact same color paint the dealership used. How do I know which paint color to order?
This occurs if the engine is running or not. The key must be in the "on" position.
Our 1995 Ford fleetwood bounder's turn signals don't work and we have to go across country tomorrow. We can't find the fuse box that holds them! There are no RV mechanics in the area either! The Manual only says it's under the instrument panel… Please help!
I just recently bought a 2007 Ford Mondeo 1.8 TDCI 6 Speed Manual and it has picked up a very annoying vibration the car has done 158000 miles (used to be a private taxi) the symptoms i'm having are intermittent difficulty putting the car into 1st gear, intermittent lumpy idle and the whole car shakes when holding the engine at around 1500rpm but then smooths out at around 2000rpm it also shakes when i'm travelling at any speed apart from when i apply the brakes and it seems to stop vibrating, the engine also makes a hollow rattle when pulling away in 1st, also when i shut the engine off the whole car shudders, i originally thought it could be either the engine mounts or the dual mass flywheel but the flywheel was only replaced within the last 10000 miles or so. Just thought i would get other peoples opinions first before carrying out any maintenance, Hope someone can shed some light on this very annoying problem.
I recently acquired a Ford Aerostar and I want to remodel the interior. I'm a mom, so spills are an everyday thing. To make clean up easier, I want to put in flooring. Not mats, not spill catchers, I want house-like flooring. But because of the car seats I can't just take everything out like van campers. How do I put in flooring without removing the seats? And what type of flooring should I use?
I'm thinking about starting to drag race with a couple of friends. But at a track! Not on the street with the friends haha. I was wondering what car I should start with? Preferably American made, easy to work on, and hopefully a mopar car? If not ford or chevy will be fine. And also where should I look for one? And should I start from the ground up? Or get a finished one? And if so what parts should I get?
I thinks its the right serial, as I had to hold 1 and 6 down to get serial as someone had ripped all the stickers off the outside of the radio.
Are the Ford SYNC voice commands using minutes on my phone?
The Ford Model T was made in 1908. A century later almost every family in United States has a car.
In roughly what decade did automobile ownership become common place, eg. More than half of families had one?