Clutch replacement manual 94 ford ranger xl 4x4 V6 3.0?
Recently bought new clutch, master, and slave from oreillys. I'm wondering if I have all parts needed to complete the job. I've been doing research and have read that transmission seals should also be replaced, as well as "freeze bolts"? Kit I bought includes,
-Alignment Tool
-Clutch Disc
-Grease Pack
-Hydraulic Line Tool
-Pilot Bushing/Bearing
-Pressure Plate
-Cover
master cylinder
-Push Rod
-Clutch Release Bearing and Slave Cylinder Assembly
If anything else is required as far as parts go please let me know as soon as possible!
You mean freeze plugs in back of the engine. Unless leaking no need to be replaced. On top off the transmission just in back of the shifter assembly 3 rubber plugs that should be replaced a common problem with that transmission. Dealer sells the kit with the 3 plugs. Now once everything installed this will be one beetch to bleed the system so it will take time to do that
- Possible engine swap from 3.0 to 4.0 on 1994 Ford Ranger XL 4x4 manual? I'm wondering if I can drop a V6 4.0L engine straight into a V6 3.0L Ford Ranger XL? Both are 1994 ford rangers, everything the same as far as model/year just different size engine… And if not, what would need to be converted? I found a 4.0 for $250 with 0 miles so if its as simple as swapping engines/trannys I'm going to go for it… Thanks for help!
- How to diagnose clutch master cylinder or slave cylinder clutch is solid will not disengage can't push in at all? 94 Ford Ranger V6 4.0 2 wheel drive my clutch went solid while driving last night it will not disengage wondering how to diagnose if it's the clutch master cylinder or the slave cylinder please help no fluid leaking anywhere I'm hoping it's just the master I would be the cheap and easy one just don't know how to tell which one is bad
- Clutch slipping on 94 ford ranger 4x4 v6 4.0 manual trann? I recently bought a 94 ford ranger V6 4.0 4x4 manual, but the clutch is definitely slipping. I bought a new clutch set, master cylinder, slave cylinder, hydraulic release system, and upgraded clutch hydraulic line connection from Power Torque… Does anyone know all the tools I will need? As well as a step by step installation guide? I don't have $2,200(the lowest price in town) to spend taking it to a shop… Please help!
- 2009 ford ranger air conditioning compressor clutch bolt broke, clutch fell off,? Bolt stuck in compressor shaft. Best way to get the bolt out, or take the pulley off to get a better grip on the shaft?