Clutch slipping on 94 ford ranger 4x4 v6 4.0 manual trann?
I recently bought a 94 ford ranger V6 4.0 4x4 manual, but the clutch is definitely slipping. I bought a new clutch set, master cylinder, slave cylinder, hydraulic release system, and upgraded clutch hydraulic line connection from Power Torque… Does anyone know all the tools I will need? As well as a step by step installation guide? I don't have $2,200(the lowest price in town) to spend taking it to a shop… Please help!
This is a big job but you can do it. First thing, you need to buy a manual, just a cheap aftermarket shop manual. Read it and understand everything about the job before you start. There are lots of little details. Don't forget to have your fly wheel resurfaced or your new clutch won't last 3 weeks, and don't forget to replace the pilot bearing in the crank shaft, and of course the throw out bearing.
- Possible engine swap from 3.0 to 4.0 on 1994 Ford Ranger XL 4x4 manual? I'm wondering if I can drop a V6 4.0L engine straight into a V6 3.0L Ford Ranger XL? Both are 1994 ford rangers, everything the same as far as model/year just different size engine… And if not, what would need to be converted? I found a 4.0 for $250 with 0 miles so if its as simple as swapping engines/trannys I'm going to go for it… Thanks for help!
- How to diagnose clutch master cylinder or slave cylinder clutch is solid will not disengage can't push in at all? 94 Ford Ranger V6 4.0 2 wheel drive my clutch went solid while driving last night it will not disengage wondering how to diagnose if it's the clutch master cylinder or the slave cylinder please help no fluid leaking anywhere I'm hoping it's just the master I would be the cheap and easy one just don't know how to tell which one is bad
- 2009 ford ranger air conditioning compressor clutch bolt broke, clutch fell off,? Bolt stuck in compressor shaft. Best way to get the bolt out, or take the pulley off to get a better grip on the shaft?
- 2001 ford ranger transmission slipping? Had a old bottle mecron put it in and it drained out the bottom, leaky hose easy fix. The guy at the part store said it takes mecron 5 should I drain out all the fluid 10.5 quarts or can I get by with 1 quart of the old mecron