1994 ford mustang gt oil pump change?
I been trying to find a 1994 ford mustang gt oil pump change video, i couldnt find a video on it, could someone help me out please and thank you,
if you give me a video on how to change it you get 10points ^^
Ford mustang 1979 / 1993 oil pump 5.0litre $140
OIl pan has to come off.
Put a Melling M68A pump in it.
camshaftshaun@gmail.com
You'll just about have to lift the engine out of the engine bay given the Fox-body crossmember and oil pan geometry. The pan has to come off to access the two bolts that hold the pump on.
- Oil pressure - in my dashboard - CAR OIL CHANGE -? Hi i'm getting the below message in my dashboard. Mine is a 10 yrs old ford card LOW OIL PRESSURE. could the above be due to ENGINE OIL due to be replaced. Or oil gone old or bad. i jut recently changed oil - its a 5k miles synthetic oil.
- On my 2000 ford mustang why does my air pump (smog pump) only blow air for 5 seconds after start up? Is that normal? I have p0411 secondary air injection system insufficient flow detected. I've checked the hose that comes out from the pump, it's blowing air but I believe it should blow air for much longer than 5 seconds on start up.
- When changing the power steering pump on a KA (54) can you use PTFE tape to seal the pressure line from pump? I have changed the power steering pump on a ford KA (54) and when removing the pressure line from the pump there was some kind of seal on it but I don't know what it was, so I was hopping that PTFE tape would do the same job at sealing the thread. Any help please. Andy.
- How to change water pump on 1993 Ford Tempo? I managed to get the drive belt off but I can't seem to get the tube that goes into the water pump off. It seems to be made of metal or something. I also can't seem to reach the 3 bolts that hold the water pump on, they seem to be in places to tight to reach. Any suggestions?