I have a ford f150 xl 4.9l juct changed the plugs and wired now it won't start what is wrong?
I have a ford f150 xl 4.9l juct changed the plugs and wired now it won't start what is wrong? - 1
Hopefully you did one plug and wire at a time rather than just ripping all the old ones out. This way they are kept in the proper order. This link will help.
Make sure the plug wires are in the correct order…
- Why did my car start and die when put into gear? Now it won't start at all? It's a cold winter day (below zero) Car started right up! I let it run for about 2 minutes, I put it in gear and it just died. I figured it's cold out, not real surprising, but when I tried to start it again, it won't start! Turns over fine but engie won't start! Any ideas? 2003 Ford Taurus 3.0L
- IMy ford F150 with a 302 is getting gas it looks like and spark. But will not start.I chaned the Deastribter also and put in new plugs IMy ford F150 with a 302 is getting gas it looks like and spark. But will not start. I chaned the Deastribter also and put in new plugs
- I own a 2006 Ford Expedition. I just had the coil packs and plugs changed? After having them changed, when the truck gets warm. The idle drops down to 250 rpm's and it dies when slowing down to a stop or turning. Can't find any vacuum leak and double checked all electrical connections. Any advice on what it could be?
- Car doesn't have the fan wired up? My '64 Ford Fairlane obviuously has a fan in the engine. However, the guy we bough it from built a whole new engine so the fan is run by -manually- connecting the fan wires to the car battery. Does anybody know how/what I need to do? Thanks. The engine is a 302 btw…