My low beam socket is like stuck?
I have 2015 Ford Escape, I went to change my low beams because my LED light was out. Well I take my bulb out but the socket that's attached to the car is like stuck? I don't know if it's stuck or if it just fell like came apart? But I need to replace my low beam! Help?! I can't fit my hand in there to grab it
Remove the headlight assembly and fish it out.
Watch a youtube video showing how to change the bulb you're trying to replace.
- Socket size to remove starter? I have a 2004 Ford ranger 2 wheel drive with a 3.0 6 cylinder. I was able to get the 2 mounting bolts on the bottom with a 13 mm. However the socket set I have only goes to 14 mm. What size do I need to have to get the last bolt located on top near the solenoid?
- Dim Low Beam on 2001 Ford Focus? A few days ago, I tried replacing my headlight bulbs with halogen ones, but one of them burnt instantly, so I installed the old ones back. The problem is that now the low beam is very dim, I can't see anything at night. The high beam works perfectly (high and low beam are in the same bulb). Also, when I switch to the low beam, the high beam indicator on the dash is dimly lit. Any ideas on what the problem might be?
- 2001 ford focus low beam lights not working? Low beam lights not working but my high beam lights work fine. What can be causing this? I checked the relays under the hood all 4 relays are good. Also checked fuses in car and those are good. Replaced malfuction switch that goes to steering columm and still the low beam light do not work also replaced head light bulbs. What else can it be? Can the head light switch that goes to dashboard be causing this i haven't replaced that yet but that is my next step. Any advice?
- 2003 Ford Explorer Stuck in 4WD Low? 4.6 Liter V8, 4WD, Light on 4wd low is always on and the other two buttons, High and Auto don't seem to do anything. What is next step for diagnosis and repair.