2006 Ford Escape 4 cylinder not hybrid? - 1
It dies and when you try to restart it nothing happens. Engine doesn't turn over but all the dash warning lights come on. Not the check engine light. Then after a while of fooling around with it the engine turns over and starts like nothing is wrong. The problem is intermittent.
What is wrong with it or what do i look for?
It dies and when you try to restart it nothing happens. Engine doesn't turn over but all the dash warning lights come on. Not the check engine light. Then after a while of fooling around with it the engine turns over and starts like nothing is wrong. The problem is intermittent.
What is wrong with it or what do i look for? A fuse may be slipping out - poor connection; or it could be something similar with the starter relay (if so equipped). It could be a bad solenoid on the starter or it could be the wire (sometimes yellow) that connects to the starter solenoid may be loose. OR it could be a bad connection on the key switch.
Could be a dirty battery terminal, could be loose.
Before you throw any money at it fully diagnose the problem. Otherwise you can end up with a new car for your radiator cap.
Hope this helps.
Thanks of taking the time to help. Sounds like good places to look.
Thanks of taking the time to help. Sounds like good places to look.
- Which cylinder is cylinder #5? I posted this the other day but in a hurry with not much detail so here it is again I drive a 2004 Ford taurus with a v6 24v DOHC Duartec engine and my computer is reading a bad ignition coil on (coil e #5) replacing it won't. Be difficult I'm just not sure how to determine which cylinder is which
- How to diagnose clutch master cylinder or slave cylinder clutch is solid will not disengage can't push in at all? 94 Ford Ranger V6 4.0 2 wheel drive my clutch went solid while driving last night it will not disengage wondering how to diagnose if it's the clutch master cylinder or the slave cylinder please help no fluid leaking anywhere I'm hoping it's just the master I would be the cheap and easy one just don't know how to tell which one is bad
- How to remove ignition switch Cylinder from 98 ford crown victoria if the ignition cylinder is stuck? I have a 98 crown Victoria. And i used a wrong key by mistake yesterday and now my actual key won't work. I've tried removing the ignition lock cylinder but any video i watch on Youtube tells me to turn the key to replace ignition lock cylinder but i can't do that because its jammed. I've tried jiggling the steering wheel and turning the key but no luck. Pretty sure its the ignition lock cylinder but i can't get the damn thing out without turning the key
- Where to put water in engine? Ford escape hybrid 07? I'm a girl totally ignorant on car stuff. Where do I put water in the engine of my car? And what else should I check for regularly besides oil changes. I do these myself. Would anyone please label this picture for me?