I put a clutch in a ford pickup it won't go through gears now?
I put a clutch in a ford pickup it won't go through gears now?
I bleed the clutch it's still hard to get into gear
You did it wrong.
Maybe the release bearing and fork was not assembled correctly? I assume it was a new clutch kit?
- 2009 ford ranger air conditioning compressor clutch bolt broke, clutch fell off,? Bolt stuck in compressor shaft. Best way to get the bolt out, or take the pulley off to get a better grip on the shaft?
- I have a 2011 ford transit connect.1.8tdi.when I'm driving along goin up through the gears around 1800 rpm it shutters or kinda misses I have a 2011 ford transit connect.1.8tdi. When I'm driving along goin up through the gears around 1800 rpm it shutters or kinda misses
- I have 1998 Ford Windstar as of now when I put in drive/reverse it won't move. It just revs. The car starts up fine? It started while I was driving down the road and I pressed the gas to go a little faster and my rpm went up to 4 and went down. I have an automatic too. There's no burnt smell in my transmission fluid stick/tank. I just left the gas station before this happened if that helps. Any ideas? Someone suggest my second/reverse band and I have never heard of it.
- Ford Focus 1.8 TDDI was popping out of 5th gear now won't go into any gear! Is it Clutch or Gearbox? The car which is a 2002 was jumping out of 5th gear into neutral when travelling at 60mph. Now it won't go into any gear and I can only start the car with the clutch pedal pressed in and when I release the clutch pedal with the gear stick in neutral the car stalls. The gear stick will literally not go into any gear. I think I need to find a used gearbox and I think the clutch is fine. What do you think?