Is it safe to put hydraulic oil in my ford rangers power steering pump?
Is it safe to put hydraulic oil in my ford rangers power steering pump? - 1
No. They separate. Gum up.hydraulic fluid heavier.
It's impossible to say unless you know exactly what chemicals you're mixing. But why would you do this anyway? Power steering fluid costs almost nothing, so why risk mixing chemicals and possibly damaging your system?
Some system will accept it, some won't. Use the recommended fluid for your car. Simple.
- Where do i put in aw-46 hydraulic fluid in 1990 ford f600 dump truck? I believe it goes in somewhere under the dump box once lifted. is there a link to some specs that i could possibly print out so i can see where to fill it at?
- Did ford ever put a V8 in any of the Rangers? I'm wondering if Ford ever made a Ford Ranger with a V8 engine. I know for a fact that they put a 4 cylinder and V6's in them and I know they put V8's in Ford Explorer's but I have no idea if they put them in the Ranger
- When changing the power steering pump on a KA (54) can you use PTFE tape to seal the pressure line from pump? I have changed the power steering pump on a ford KA (54) and when removing the pressure line from the pump there was some kind of seal on it but I don't know what it was, so I was hopping that PTFE tape would do the same job at sealing the thread. Any help please. Andy.
- Ford f150 2007- making a whining noise, I have replaced power steering pump? I was told by a shade tree mechanic that there was air in the lines, bc while it's running the fluid level in canister is moving around a good bit. What's the line i need to break to drain fluid out completely