How to replace lift pump gear on 4000?
Witch way to turn pump gear on a 4000 ford 1964 tractor hydraulic lift
It should be a right hand thread so turn it counter clockwise to remove. Forget Nasty Troll comment. Ag implement shops stand ready to furnish any parts and labor you need.
Bit off more than you can chew? Sorry but if you need to ask here your in way over your head, And yes you have 2 problems. First, hardly any shops will work on that old iron anymore, and second you have a pump that's failed, needing to know what way to turn it is useless to you, and makes no sense at all as to you attempting to repair it
- I have a 2000 ford Taurus station and can't put it into gear.why can't I put it into gear? I have a 2000 ford Taurus station and can't put it into gear. Why can't I put it into gear?
- On my 2000 ford mustang why does my air pump (smog pump) only blow air for 5 seconds after start up? Is that normal? I have p0411 secondary air injection system insufficient flow detected. I've checked the hose that comes out from the pump, it's blowing air but I believe it should blow air for much longer than 5 seconds on start up.
- When changing the power steering pump on a KA (54) can you use PTFE tape to seal the pressure line from pump? I have changed the power steering pump on a ford KA (54) and when removing the pressure line from the pump there was some kind of seal on it but I don't know what it was, so I was hopping that PTFE tape would do the same job at sealing the thread. Any help please. Andy.
- Why my cars gear stick popping out from 1st to 3rd gear, from 2nd to 4th? The car is Ford Focus 2002 1.8tdci. Poppong out from 1st gear to 3rd and from 2nd to 4th. Reverse works fine, I'm able to start to drive car from 3rd gear with balancing clutch and acceleration. No strange noises thou.