1992 Ford f-150 302 efi misfire on cyl. 1 and 2?
1992 Ford f-150 302 efi misfire on cyl. 1 and 2? - 1
Added (1). has no power under load, often dies at idle, surges under low rpm at low speeds (15-40 mph), seems to have full power when floored unless like i said under load. Replaced plugs, wires and distributor cap, the problem persists.
Yea, probably.
Run a compression check on it. The valves might be bad.
- Are ford ranger body parts for a 4 cyl and v6 interchangeable? I have a 2004 ford ranger 2.3. I went to a salvage yard to get a hood for my truck since mine was really bent. The guy had one hood left and he said it should work. I put it on my truck but it would not close. I slammed it down and still would not close. The shape looks like it belongs to my truck but it just wouldn't close. All sales are final so i couldn't return the hood. I put the old hood back on and that one closes properly
- What Ford vehicles with a 302 motor comes with a 4 barrel carb (and only comes 302 with a 4bc)? I have a 1989 mustang gt motor and I'm making it carbureted and I'm looking for any vehicle with a 302 that carries a 4b. I'm going to a junkyard where they don't help with finding vehicles, so it would be helpful to know what vehicles only have a 302 with a 4bc, that way I can look it up on the website and know exactly where its at.
- How to fix a misfire problem on a 302 Ford? I have a 1970 Torino with a BOSS 302 and the number 6 cylinder(2nd cylinder from the firewall on the passenger side) is misfiring. I replaced the spark plugs, the spark plug wires, ignition coil, distributor(cap and rotor) and its still misfiring. It's always been that same cylinder since I bought the car a few months ago. I don't know if it has compression or it the valves are messed up, but when I took the wire off of the spark plug, it was sparking as the engine was running.
- Why won't the gas in my fuel tank go in the carburetor? 1984 Ford F-150 302 5.0 Automatic? I have put a new fuel tank, new starter, new battery, new fuel lines, the fuse is good for the fuel tank. I have at least a 1/4 of a tank in the fuel tank, i can only get it to run if i put gas directly into the carb, it won't flow from the furl tank to the carb. What should i do? Please Help. * i meant new fuel pump, not tank.