I'm having problems with my transmission on a 2001 ford escape?
I can't accelerate passed around 60 km. It seem to be stuck in first gear, you can put the pedal to the floor and i will rev up to around 3500 4000rpm but won't go into second gear. It is automatic, i can manually shift into first and second, and you can feel it change. But when you put it into drive, nothing, won't go passed first.
does anybody know why this could be? My tranny fluid isn't low, it isn't as red as it should be, but it doesn't smell burnt.
There's probably a shift solenoid that won't activate 3rd gear. But a tranny shop will tell you you need a major overhaul - and you just may need that overhaul - I really can't say from here. They prey on our lack of knowledge about our cars.
There's nothing you can do yourself to fix this. Take it to a transmission shop. This is an internal problem
- My '06 Ford Taurus is having what i'm assuming transmission problems, any ideas? The other day while attempting to back up a small slope, my engine revved up and a message came on the info area of my dash saying to check the transmission. I turned off the car, turned it on and the check engine light was on. I go home and check the trans fluid and it's full. The next day I start my car and the check engine light is off, but now my car shakes on heavy acceleration and gear changes. I'm not a car person. Any ideas?
- Shifting problems and intake problems? I drive a 1997 ford ranger with a 2.3l automatic. I have recently experienced a hard shifting in my truck even when I'm not on the gas it has problems shifting. And I cleaned my air filter and filter hose that goes to my throttle body and there was transmission fluid in the hose. What can be causing this and how can I fix it or how much will it cost roughly?
- I have a ford falcon ef 1995 model and I'm having problems with my smart lock? It won't flash on the dash and it don't recognise the remote key pad the interior lights won't turn on the motor turns over but it won't start I need help with this.
- Having problems with my breaks on my 1996 ford f150? I have tried to find out what is wrong with it and I have tried every I can thank of. I can't get my bleeder valevs to open with out them breaking them off what do I need to do about this.