Bolt broke in block. What can I do?
I have a 2010 ford f350 with the 6.4l. The wires for the egr temperature output sensor were ripped out of the sensor. So I went to replace the sensor. Well it snapped off. What can I get it out with? Can't use easy out or anthing. The bolt and sensor are two separate pieces and so the sensor is still there stabbing through the bolt. What can I do? If your trying to recall which sensor this is it is behind the passenger side head. Here is a picture of the sensor. 
Drill it out with progressively larger bits until you can work all the pieces out with whatever you can get in there. You may have to re-tap the hole and / or sleeve it.
- Can a bad thermostat in a car cause the tempature guage in the dash to not work? Or is the guage itself broke? I have a 1991 Ford ranger and have no idea if the engine is overheating because the gauge doesn't work. Thermostat or gauge? Of its the gauge do I have to replace the whole cluster?
- Broke dome light in my truck now stereo won't work? So as i was taking the headliner out to replace the fabric on it i snapped the dome light i didn't see you had to unscrew it so now the stereo stopped woking when i took the dome light out. How do i get the stereo to work again its a aftermarket one came with the truck when i bought it btw the truck is a 1994 ford ranger xlt extended cab 3.0 liter. Please hel[p me
- 2009 ford ranger air conditioning compressor clutch bolt broke, clutch fell off,? Bolt stuck in compressor shaft. Best way to get the bolt out, or take the pulley off to get a better grip on the shaft?
- Tstat Ford 94 Mustang: broken bolt, drilled new hole for a bolt? Replacing thermostat in my car when the bolt broke leading us to need to drill a new place for another bolt right next to the old one. Will drilling this and placing a new bolt, hold the thermostat in place and work to keep my car from over heating? I have no idea if doing this will work…