1998 Ford ranger 3.0 4by4 automatic transmission no reverse?
Reverse does not work and will not go into 1st gear, 4 wheel drive works fine
Can be the low and reverse clutches are worn out. Can also be a valve body problem. No matter it is going to have to be looked at by a professional. I would not drive it any longer as you may do more damage.
Needs rebuilt transmission more than likely the reverse band has broken. Which is a common problem. Find local shop at ATRA.COM for more help
- Will a Ford Explorer transmission exchange for a ranger transmission? I have a 2002 Ford Explorer 4x4 with a 4.0 engine. The truck needs a new transmission and I was wondering if a transmission from a 2002 ranger 4x4 with a 4.0 will bolt up to the explorers.
- What automatic transmission fluid/oil do I need for a Ford Ranger 2006 regular cab? I'm looking around the net, but no luck. My dad is at Walmart trying to find the right one and needs it for his truck.
- How to remove the automatic transmission sensor off a Ranger? I have a 1994 ford ranger, and need to replace the transmission sensor. Can anyone send any videos/pics/diagrams, i have been looking for awhile and found nothing.
- Auto help needed 2006 Ford ranger with a 4.0 and automatic transmission? OK it will not start but it will crank and crank. The CEL (check engine light) is not on and no codes it has a new coil pack, new spark plug wires, new spark plugs and a new crank position sensor. It it's getting good spark and good fuel but will not fire up at all. Fuses and relays are all good. Anyone got any good ideas please help.