I have a 1995 Ford windstar am having issues starting?
I have replaced starter, battery, alternator, spark plugs also the wiring I'm puzzled
Have you checked to see if you have proper fuel pressure? Might be a bad fuel pump.
Yes have checked all. That already got it started distributer wires were not in right place now still have overheating problem
- Will a 2000 Ford Windstar lx fuse box diagram be the same as a 2003 Ford Windstar fuse box? I found a link about a 2003 but I need to know if it'll be the same for a 2000. If it ain't can anyone help me out with a link showing information like this but about a 2000 model? Thanks. http://www.fixya.com/cars/t11808484-2003_ford_windstar_fuse_box_diagram
- I have a ford falcon ef 1995 model and I'm having problems with my smart lock? It won't flash on the dash and it don't recognise the remote key pad the interior lights won't turn on the motor turns over but it won't start I need help with this.
- I have a 1995 ford windstar 3.8 engine? I replaced the ingnition coil plugs and wires and it ran like an champ and it is still running okay but it has an camsaft position sensor code popped up and a cylandar 2 missfire we just replaced the plugs three months ago could that sensor be throwing things off it still runs fine and my other problem is the door aja light keeps beeping on and lights on even though the door is closed
- Having issues on troubleshooting my wife's 2000 Ford Contour SE V6 2.5 DOHC? After driving for about 3-4 miles it starts to jerk and loose power. Almost as if someone is hitting you from the back. It's not throwing any codes or making the check engine light come on so that tells me it can't be major. I hope. I have changed the fuel filter, added Techron concentrated fuel treatment, changed the (CPS) camshaft position sensor, changed the oil and filter. I also replaced the air filter and cleaned the MAP sensor. What else can it be? Someone please help.