How to change spark plugs on a 1989 Winnebago with a 460 ford engine?
How to change spark plugs on a 1989 Winnebago with a 460 ford engine? - 1
Ford. The proper name of a company that was founded by Mr. Henry Ford. The Ford family would appreciate the respect and the capitalization of the family name. Is your name "Wesley smith?" All spark plugs are removed the same. Tools and torque are required. While this may look or sound simple, there are 8 ways to screw this spark plug replacement thing.
Most likely you remove the dog house from between the front seats and go in through there. Maybe front two cylinders can be reached from the outside. I don't know
Follow the plug wires down from the distributor to each individual plug. Do them one at a time. Do not over tighten new plugs! Just past finger tight is fine. Apply anti size lubricant to new plug threads before installation. May need a socket drive extension. Likely a 5/8" socket. Need a deep well socket with a rubber boot on the inside bottom of the socket. Any way you do it (in line with what I said) will be fine. ONE AT A TIME. DO NOT OVER TIGHTEN! And always do everything you can to keep that engine. #1 ever produced engine.
- I got 105k miles on original spark plugs when to change them? I have a 2004 ford mustang 3.8 v6 and i bought this car 5 months ago with 97k miles on it and the spark plugs are still original i was curious as to when to change them money is a little tight at the moment can i still hold off maybe another month with them?
- Why is my 2009 ford flex shaking after spark plugs were changed? After doing a tune up on my 2009 ford flex, the car started shaking and the AC does not cool. What could be the problem? I used OE motorcraft spark plugs
- 1999 Ford escort water in spark plugs? Car shut off while driving so i pulled over to find a huge hole in the crank and motor oil spilling out. The car never over heated, but i got the crank fixed but when i put it on car won't start, checked the spark plugs to find water in the spark plugs also check the compression of the cylinders and all are at 0!