What is the tyre pressure on a ford fiesta 1.0 ecobooost 125?

What is the tyre pressure on a ford fiesta 1.0 ecobooost 125?

It is on the sides of the tire. Look. What do you think all that writing on the tires are for. Decoration.

The pressure depends on which tyres you have on the car. The same model can have different tyres which require different pressures. Even worse, it will depend on how much weight there's in the car. If you have four passengers plus luggage the pressure should be higher than if there's just the driver in the car.

The tire pressure on the tire is not the recommended pressure for the vehicle but for the tire - look for a sticker under the hood or on the door frame area.

You have two places to look. When a car is manufactured the company places a metal tag on the inside of the driver door frame. This tag will list information for the load of the vehicle including tire pressure for the ORIGINAL tires. If you have replaced the tires with a different size or brand then you would look at the tire itself. On the side wall of the tire you will see a bunch of print usually kinda small and in that print you will start seeing numbers like 205/65/16 maybe not that exact number but that kind of look that denotes the size of the tire but right after that you will see something like 35 PSI MAX that is the maxium tire pressure for that tire regardless of what that little metal tag says on the door frame. If you stick with the manufacturer recommended tire and size and keep the stock rims then this number is usually the same or pretty close. But that number is the max you should fill the tires you can go a few PSI lower but not much 3 LBS or so is about the limit on regular tires before small uneven tire wear becomes a problem. If you put other tires on that are a different size that sticker or tag will be off. Especially if you get a larger rim with a lower profile tire that 35-4 PSI would look flat or won't hold the tire up. So go off the what's printed on the tire when in doubt.

If there's no sticker in the door jamb set the pressure at 32 PSI. You can't go wrong at that #