Why my turn signals and brake lights are not working on my 2006 ford expedition limited?
Anybody know why my turn signals and brake lights are not working on my 2006 ford expedition limited?
It is a blown fuse! Replace it!
Check Fuse and bulbs… If it's a constant problem may have bad seals around lenses causing water to get in… Possibly a short somewhere if it's a constant fuse problem.
Could be a fuse or a ground problem.
Short circuit causing the fuse to blow. Check all fuses
- Why are my blink lights / brake lights working? I have a 72 Ford f100 and the rear left turn signal, brake ligh, hazard light isn't working. The light workings for "running lights " but does not blink or light up when I press the brake. I replaced the bulb. I don't know where to start
- 99 Ford ranger XLT base model. Park lights, dash lights, and license plates lights out I checked online and realized it was probably a fuse which it is. Fuse 11 in my power distribution box. The problem is I keep replacing at and soon as I turn on my lights it blows instantly. Have replaced it multiple times. So then I looked under my truck and disconnected the wiring to my taillights and replaced the fuse, it worked it didn't blow. Dash lights and license plates lights were on so I figured some where there's a problem with the brake lights. Any suggestions?
- Headlights, instrument cluster lights, tail lights, and dome light all stopped working at once? 1995 Mustang GT convertible, fuses are good, switch is good. I'm about to do a voltage drop test on it tomorrow but I wanted to see if you Ford guys knew something that I'm overlooking.
- 2001 Ford Mustang brake lights are not working, but the third one is? 3rd brake light works, All bulbs are fine, turn signals work fine, but the two brake lights not on the trunk are not coming on when pressing the brakes, what could this be?