I changed fuel filter on 2004 ford escape but it leaks where you connect them?
I changed fuel filter on 2004 ford escape but it leaks where you connect them? - 1
Well, why did you change it?
If it is a screw on connection, likely cross threaded or not tight enough. If it is a clamp on tubing either the tubing is cracked or the clamp is not tight enough. Third option is that the new filter has a crack or hole in it near the connection.
Remove the oil filter and take the old gasket off of the flange where it's stuck. You're lucky. Most idiots just keep driving until the bearings get wrecked.
Hi so it needs the right one.
Would you like a gold medal?
New filter has a crack or hole in it near the connection
Why did you change it?
So it needs the right one.
New filter has a crack or hole in it near the connection
There's always a sealing edge or gasket. Or we have mis threaded it? Under tightened?
have we twisted anything? Dirt etc all can have an effect. However we can remove. Check carefully then see how to replace if undamaged with care!
- Could a clogged fuel filter cause a code P0300 to go off in my 2004 ford taurus? My engine light went on. Got it checked at autozone and P0300 came up. My fuel gauge is also going nuts. I ll put $20 in which would give me a half tank. But I ll start the car and it will be at full, then I ll start the car later that day and it will be at three quarters. It is different literally everytime I start the car… I have no idea how much gas I have.
- 93 ford aerostar heater and ac not working unless you connect them direct.the fan swith won't turn off but it set the fan speed? 93 ford aerostar heater and ac not working unless you connect them direct. The fan swith won't turn off but it set the fan speed? 93 ford aerostar heater and ac not working unless you connect them direct. The fan switch won't turn off but it set the fan speed?