94 ford Bronco needs master cylider cap break fluid cap?
I just bought a 1994 ford bronco and it needs a break master cylinder cap… I can't find the part at any store in maryland or dc and i was wondering if there's a cap they may fit like a universal cap? Any help would be great
Try Ebay or Amazon.
You'll have to go to a junk yard. Caps are always sold with the master cylinder. I don't know of a universal fit cap. You might find one if it is round and threaded. Metal ones are almost impossible to find because of the many shapes and sizes of these caps.
It probably would take a f-150 cap of the same era. Have you looked at those?
A junkyard or pick-a-part would have them.
How about going to a Ford dealer and ordering it? Take the VIN so you get the correct part ordered. Bet it's under ten bucks!
The cap is vented, so he has to be the right one. Look for any 'F' series truck.
- How is the fluid from my radiator on my 1996 Ford Thunderbird mixing with my auto transmission fluid? I've asked and asked and no one seems to have an answer. Please any ideas would be helpful to give me some sort of clue as to where to start to get this fixed. The car still runs fine but its starting to effect the gears changing. Please any ideas would help.
- Ford transit 2002 .when I have the hazards on the break lights flash not the hazards, also when I indicate and break they both flash? Ford transit 2002. When I have the hazards on the break lights flash not the hazards, also when I indicate and break they both flash?
- Lug stud is cross-threaded, the lugnut is gonna break. I'm gonna replace the stud myself, how do I break the lugnut off? I have no breaker bar, no impact wrench. No air tools. Better to pay someone to do it>? Car is 2005 Ford Focus if that helps, front stud.
- Ford F 150 Clutch Master Cylinder? I'm replacing the master cylinder. Are there any tricks to putting the pin in? It's started, but can't get it to go through. I think I need to hold the line in with one hand, while holding the unit itself onto something solid, and tapping it with a hammer. BUT WAIT! That's three hands?