Ford ranger, 10 rear drum to disk conversion?
How much work would it be too convert my rear drums to disks? I have a 99 ranger v6 4l. My drums are the 10". My where base is the bug one I'm pretty sure like 144" or 141". Where would I buy them? If I buy a kit do I have to always use the kit brand disks?
Seems like I read that you get parts from a similar vintage Lincoln since those all had rear disc.
Hi why waste money on a conversion on such an old truck. Why not save the money and get a better truck with coil springs and disk brakes.
- 1993 ford ranger locking hub conversion? The 4wd locking hubs are shot. If you put them in the lock position they just pop and grind. I took them off and they are just wore slap smooth out. I can replace them with factory replacement parts, or my question… Can I convert it over to live axle?
- I have a 1997 ford windstar and it over heated and now has milky sludge in the air filter drum? Car over heated no coolant filled coolant. It drank two full bottles running very rough miss firing and now there's a milky sludge blowing back through the air intake…
- Ford feista rear drum brakes? Just spent a load of money on the back brakes on my car i bought new brake shoes new wheel cylinders and assemble it all back together used the auto adjuster by pressing foot on brake pedal and lifting the handbrake a few times and the back brake still arnt gripping properly advise much needed got mot in a few days
- Rear drum replacement on a ford focus 2001? So my ford focus 2001 zx3 2.0 DOHC started to have some wobbling noise coming from the rear left side, which seems to be a bad wheel bearing. Since replacing just the bearing its a pain in the ***, I was going to get the drum with the bearing already pressed. When replacing a rear drum, do I have to put a new Centric Spindle Nut/Disc or use the old one? What about the spindle stub shaft? I would really appreciate your help