How to open drivers side door when both inside and outside handles are broken?

2000 ford explorer

Please USE OTHER DOOR. Go get your tools and get to it.
jimmy the inside handle with an appropriate tool. Compare normal operation by comparing to the other side.
Remove the inside handle screws and yank the cable is an option.
The body of the inside mech. Is attached to a door latch cable. Pull toward the front. Remove attaching screw from panel and lift up. It has plastic hooks. Don't forget the little triangle piece up by the mirror, as equipped.
If your hinges were bad all this time, nows the time. And they are supposed to be lubricated every service

Turn into the Hulk and bust your way out.

Remove door panel, prise mechanism with screwdriver.

Remove drivers seat, remove door panel, actuate the latch manually. All explorer outside handles are broken, 01 and below. You might not think so, but the spring is broken. All!

You carefully pull the door trim panel off, some will require destroying the door panel & you manually open the door once you get your hand to manually pull the lever on the latch

Use a slim jim to grab accuator rod not lock rod there's two one will unlock one will open then remove you door panel