1999 ford f250 electronic engine controls fuse burning while I'm driving?
I have a 1999 ford f250 unleaded fuel 5.4l.
While I drive the vehicle after a while it dies on me. I check under the hood in the fuse box and find out that the electronic engine control fuse is burned… When I place a new fuse after it dies the fuse burns as soon as I place the ignition on the on position it burns again. So I end up bridging the fuse to allow the engine to start and take it home… Now in a couple of hours I place another fuse in the Electronic engine controls and it starts right up with no issues… And then the issue repeats itself once I drive it again… Can you Help me? Need some information
If you want to cheat and save some bucks, wire the two fuse ends together and bypass the fuse panel and see what gets hot or malfunctions. I have worked on a lot of heavy equipment and no way to trouble shoot electrical malfunctions, bridge the fuse panel and you will find the problem
Have it checked by a mancaniac.
Keep bridging the fuse and you will be able to track the short by the burnt wire.
- Will a 2000 Ford Windstar lx fuse box diagram be the same as a 2003 Ford Windstar fuse box? I found a link about a 2003 but I need to know if it'll be the same for a 2000. If it ain't can anyone help me out with a link showing information like this but about a 2000 model? Thanks. http://www.fixya.com/cars/t11808484-2003_ford_windstar_fuse_box_diagram
- Which fuse is the correct fuse for the radio in a fuse box? Read details? A 2002 wind star ford van has a radio that doesn't work. Which fuse would need to be replaced in the fuse box?
- I think I blew a fuse in my 2002 Taurus. I can't find the fuse and want to know if it sounds like i did? So when changing a Puddle Light in my 2002 Ford Taurus I hit the wire that connected the lighting and lighting case to my mirror. Something sparked and my interior lighting, glove box lighting, and mirror lighting is not working. Is this something as simple as a fuse?
- What is the difference between a Electronic control module and Engine control module? I recently bought a cheap Ford Focus which was affected in floods… I got the water of the engine and pretty much all the places, all my lights and few other electronic functions work… But my engine doesn't turn on and my HUD is dead, but works on another car… What should i do?