1999 ford transit ignition lights staying on after removing key?
All ignition lights stay on after removing key but if you turn heater/blower on full they go off, really strange any help would be much appreciated
cheers in advance Elliot.
That sounds like a relay problem
Hi yes it is a very common fault with the ford transit so you may need to fit a kill switch.
- 99 Ford ranger XLT base model. Park lights, dash lights, and license plates lights out I checked online and realized it was probably a fuse which it is. Fuse 11 in my power distribution box. The problem is I keep replacing at and soon as I turn on my lights it blows instantly. Have replaced it multiple times. So then I looked under my truck and disconnected the wiring to my taillights and replaced the fuse, it worked it didn't blow. Dash lights and license plates lights were on so I figured some where there's a problem with the brake lights. Any suggestions?
- I've got a 87 Ford L9000 and the brake lights are staying on continuesly? I've replaced the brake light switch and nothing changed, if I disconnect one of the wires for the brake switch the lights with go out, any ideas on where to start next
- How to remove ignition switch Cylinder from 98 ford crown victoria if the ignition cylinder is stuck? I have a 98 crown Victoria. And i used a wrong key by mistake yesterday and now my actual key won't work. I've tried removing the ignition lock cylinder but any video i watch on Youtube tells me to turn the key to replace ignition lock cylinder but i can't do that because its jammed. I've tried jiggling the steering wheel and turning the key but no luck. Pretty sure its the ignition lock cylinder but i can't get the damn thing out without turning the key
- Hi we have a ford focus cmax 2.8 diesel and battery light staying on after fitting new alternator how do I turn it off? When car is running battery light comes on, when take battery leads off cars still running how do I turn light off thanks for reading