What stereo wiring harness do i need for a 94 ford probe gt?
What stereo wiring harness do i need for a 94 ford probe gt?
The one that works with the stereo you are trying to install.
There are two options- one is to splice in the new harness (or wires) for the new radio into the existing harness using "crimp on" connectors. For this you will need the wiring code for the probe and the new radio.
The second solution is to go to Walmart and see if they have the plug that will mate to the existing Ford wiring harness. It will have a key. Other car stereo shops will have such adapters and not knowing what manufactures they carry any number I give you might prove useless.
- Is there a stereo harness guide for a 2015 ford taurus? I'm trying to wire 2 10' kickers with a 600w amp into a factory stereo without having to replace any of the stock parts. I have a output line converter but I don't know exactly which wires, if any, that I need to splice in order to put the converter in as well as the ground wire for the amp. If any information that can help me get this project moving is greatly appreciated.
- How to put the wiring harness back on a 93 ford ranger for the tail lights after I put the bed back on? How do I put the wiring harness back on a 93 ford ranger for the tail lights after I put the bed back on?
- Need wiring ignition switch connection DETAILS for 73 (11/72) Ford F100? Wire colors are Yellow, Black, Red w/Blue stripe, Pink, & two (2) Red w/Green stripe (on one terminal). I haven't found anything for these combination of wire color on the web. I need to know where to connect each of these wires… Correctly. I have a ballast, an ignition module, starter solenoid, distributor and coil to connect this specific combination of wires colors to, with this 6 pin switch (only 5 are connected because two red w/green stripe wires are on one pin/terminal)
- I need the wiring color codes for the radio on my 2007 Ford e-150 cargo van? I'm installing a new car stereo in my work truck. It's a 2007 Ford e-150 cargo van (4.6 liter v8, if that helps). I have it connected for the most part (it turns on and plays properly) but every time I turn off the car the entire radio resets so I can't save any presets or audio settings. So I need the color codes for the factory harness. And yes I cut the factory harness and I'm just connecting those wires directly to the harness for the new stereo.