Taking out a 1996 Mustang taillight?

What tools do I need to bring with me tomorrow to the junk yard to take out a 1996 Ford Mustang drivers side tail light and how do I check if the wiring is bad or good on the junkyards tail light please give me the size tools be specific best answer gets 5 stars.Taking out a 1996 Mustang taillight

You need flat screw driver 11mm deep 1/4 inch drive socket, pull the cowling remove connections and 4 11mm nuts pull out lights.

  • I have a 2008 Ford Taurus Limited. The air cond. Compressor is taking forever to engage? The problem gets worse the higher the outside temp. And when the car is idling. Freon level is normal, and the compressor is not short cycling. Any ideas? Forgot to add that the condenser fan is running non-stop at idle when compressor is not cycling.
  • I have a 1999 Ford Mustang GT and its sluggish when taking off? What could be the issue? Its sluggish on power usually only happens in the first 3 gears between 1800 and 2000 rpms. And also when I give it gas at idle it stays at 2000 rpm before idling down. 178k miles. Just changed a faulty o2 sensor. So what else could possibly making it do this. Probably plugs and coil on plugs need to be changed? If any advice it would greatly help thanks
  • Left Rear Wheel noise when taking a slight right turn? I have a noise coming from my back of my Ford Focus, ( woo woo woo ) for a while now, it's driving me crazy, I can only hear it when I'm in second or third gear when turning slightly to the right, also i just realized that when in star moving or my car is reversing for a second or two I can hear a squeeking noise. I lifted the car and checked the wheel and is moving freely with no noise whatsoever, it looked ok. I kind of run out of ideas can anyone give any suggestions please!
  • What does taking the muffler off do? I have a 2005 Ford Explorer Sport Trac. I was wondering what would it sound like if I took off the muffler? Would it be louder? Would it be a clean loud or nasty?