Looking for prindule switch for 2000 3.8 ford windstar?
Looking for prindule switch for 2000 3.8 ford windstar?
That's not what it's called… Which is why you're having a hard time looking up the part. Older cars called it the Neutral Safety Switch, newer cars call it the Range Sensor or Range Selector. You need to adjust it correctly or the transmission won't shift right. Here's a place to start
- Will a 2000 Ford Windstar lx fuse box diagram be the same as a 2003 Ford Windstar fuse box? I found a link about a 2003 but I need to know if it'll be the same for a 2000. If it ain't can anyone help me out with a link showing information like this but about a 2000 model? Thanks. http://www.fixya.com/cars/t11808484-2003_ford_windstar_fuse_box_diagram
- Why did my 2000 Ford Windstar just blow all off the tranny fluid out. But now its not leaking anything? I drove it with a trailer attached all day then I dropped the trailer off and drove home. When a was turning on to my street the car violently shuck but kept going I pulled into my drive way and looked under my car and big puddle of tranny fluid everywhere. So I filled it up this morning and drove it 75 miles and when I got back I was still full on fluid and nothing was leaking. So WHY?
- How to change the ignition switch on a 2000 ford ranger? It has the anti theft protection and a chip in the key. So, my question is, is the dealer the only place that can scan the key and make it work?
- My 2000 Ford Windstar has a coolant leak. What could be causing it to leak? It has two leaks. One is from the passenger side near the front tire and the second is right below the driver's seat. I have to replace the coolant after I have had the heater on for a bit. I never have it on for more than 15 min. Not because the coolant runs out in that time but I just don't use it for long. I took it to the mechanic and he stated it was the "lower intake manifold gasket". I'm asking if anyone has any other ideas because that repair is pretty pricey.