Ford Transit Service light?
I've got a 2.4 Rwd Ford transit (80,000 miles) MK6. There are three red warning lights on. Service light, oil can light and battery light. When I turn the engine on only the service spanner light stayes on. I've tried holding the brake pedal and accelerator down for a minute but nothing happens. Any ideas?
Turn the ignition on, press accelerator and brake pedal down together for around 20 seconds, or until the spanner starts to flash. Turn off the ignition and take feet off pedals. Cycle the ignition to make sure light has gone off.
It probably does need service, like a check engine light, because once the vehicle is started, you obtain charging-battery light, and oil pressure- oil light, so that is normal, those other lights should go out!
You can get all kinds of answers but the first thing I'd do is read what it means in the owners manual. Then you can ask a better question if you need to.
- 2003 ford taurus ses sedan 3.0L OHV (vin: U) Loose fuel cap warning light (yellow light)? My "loose fuel cap warning light" is on inside my car. I had the gas cap replaced and no codes show up on the OBDII scan tool. What could cause the light to stay on?
- 2003 Ford Taurus SES oil light and gas cap light? My cars oil light (red) and gas cap light (yellow light down and left from the oil light) is on in my car. I used a scan tool and no codes came up. It's not leaking oil and everything is fine. I just do not know why the two lights are on? I bought the car about two months ago and the lights were on before i bought the car… any reason they're on?
- Difference between SERVICE ENGINE SOON and CHECK ENGINE light? Is there any difference? I have a Ford Mustang 2002 and my SERVICE ENGINE SOON light is on. Does it mean something is wrong with my car? Do Mustangs also have a CHECK ENGINE light?
- 2006 Ford Mustang with ABS light and TCS light. What do I do? I recently got an 06 Mustang with an ABS light and TCS light on. I had it checked out just by a quick view. The guy does not believe my hub assembly or bearings are bad. I replaced the ABs sensor and it still did not seem to help. When I had it scanned the computer said it is the passenger rear ABS. I have no grinding, no noises, no issues driving, but I want to fix it properly. Does anyone have any ideas on what steps to take now?