Does my 1994 Ford F150 4x4 have limited slip differential?
So I was wondering if my 1994 Ford F150 has limited slip. I looked at the numbers on the differential cover and they are; "3L55 88 3L08". Any help?
The "L" indicates limited slip
But unless some really effed up at the factory there's no way one diff would have 3.08 gears and the other was had 3.55 gears. If that's the case, 4WD would be about useless to use.
- Possible engine swap from 3.0 to 4.0 on 1994 Ford Ranger XL 4x4 manual? I'm wondering if I can drop a V6 4.0L engine straight into a V6 3.0L Ford Ranger XL? Both are 1994 ford rangers, everything the same as far as model/year just different size engine… And if not, what would need to be converted? I found a 4.0 for $250 with 0 miles so if its as simple as swapping engines/trannys I'm going to go for it… Thanks for help!
- Have 98 Ford Ranger, 4.0, 171,000 miles, auto trans with limited slip. I've owned truck since new and have changed trans fluid every 30-35 000 miles and have never towed anything. The majority of the 171,000 miles are interstate driving. The truck shifts fine with no jerking or slippage. What I do get is thump(s) in rear end when I come to a stop, as gears are downshifting. Do I need a new transmission? Any suggestions? I suppose it's a "clunk" I hear and feel when I come to a stop, not a thump.
- Is my 9 inch rear end limited slip? I have a ford 9 inch in my 72 4x4 truck. When I jack it up and spin the driver's side wheel, the drive shaft turns but the passenger side wheel does not. If I turn the passenger side wheel, the drive shaft turns but the driver's side wheel does not. If I turn the drive shaft by hand, only the passenger side wheel turns. Since both wheels turn the drive shaft, does this mean I have posi? If so, why don't the wheels turn each other when I turn one?
- Rear differential leaking, but not from seal on 2003 ford f150 aluminum driveshaft? I noticed this yesterday, it's barely leaking, however, it's not leaking from the bottom of the seal, it is leaking from where the back face of the u joint(the face that faces the rear diff) and the pinion and it looks like it's coming from a small hole, I don't know why it is leaking fluid, if anyone has any information, that would be nice, thanks