Why is my front passenger side window on my Ford Expedition able to go down but not back up? Any suggestions?
Why is my front passenger side window on my Ford Expedition able to go down but not back up? Any suggestions?
Window motor could be broken or window isn't seated on the mechanism properly or the gear that raises and lowers could be stripped. Only way to find out for sure is to take the inner door panel off and inspect it. This is probably beyond your capabilities though so best to take it to a mechanic.
Pull the panel off the door. The window sits in a saddle; it may have jumped out of the saddle. Also, check the gear mechanisms to make sure the gear has not stripped. Be gentle, but the door panel generally pops off. It is held in place by plastic rivets.
The window might be off the track. The door panel needs to be removed to check if the track or track guides are broken.
If it is not off the track, check if the motor is getting power and ground when it is switched up. If there's power and ground, the motor is broken. No power and ground, the switch or module is broken.
- 2000 ford ranger window rolls down but not up? I have a 2000 ford ranger recently my passenger window stopped rolling up with either the drivers or passengers switch. It rolls down and the drivers window works fine. I took off the door panel and ran the motor straight to the battery and it rolled up and down fine. I thought maybe the switch but the switch for it on the drivers side doesn't work either but works for drivers window. I'm confused… Anyone got answers?
- How to fix window from 2006 Ford F150 that isn't power window but rather manual? My window seems to roll down perfectly but when I try to roll it back up it makes popping noises and is very difficult to roll back up and I have to use my hand to push it up. My Windows are not electrical but they have have the old style manual roll. It's the passengers seat. If anyone knows how to, I'd be happy to know!
- 2002 ford explorer passenger window won't go back up When you hit the down button it makes a noise, but when you hit the up button it doesn't do anything… How do you get it to where you can manually roll it bk up to put a block under it?