I have a 1997 ford expedition that will go into gear, but won't move. Ideas?
When you step on the gas it wants to move just a slight amount. The emergency brake shows off, and I have got under the vehicle and pulled on the emergency brake to see if it might be hung up.
I can help you, give me 20 min and I'll be back.
Well is the e brake hung up? If so possibility the truck won't move. If the fluid full and brake system in working order than internal problem. Find local shop at ATRA.COM for more help
It is an automatic.
Automatic trans or manual? If it's an automatic, check your fluid levels. If it's a manual, suspect a blown clutch.
- Why was the gear shifter hard to move but now very loose? The 2002 Ford Windstar hasn't been driven in a long time. The gear shifter was very hard to move but after driving it a lot, the shifter is easy to move. Is this normal? If not, what is wrong and how do I fix it?
- My 2000 Ford Taurus won't shift into fourth gear is it ok on a 700 mile round trip drive? I have a 2000 ford Taurus and it doesn't shift into fourth gear anymore. Its been that way for 2 years. It runs fine just doesn't shift into fourth gear and the transmission light does come on after a while of driving it. I was wondering if it would be ok to take it on a 700 mile round trip drive? I know its not good for it I just need to know if I'm going to be stranded on the highway somewhere because my trans went out.
- I have a 2000 ford Taurus station and can't put it into gear.why can't I put it into gear? I have a 2000 ford Taurus station and can't put it into gear. Why can't I put it into gear?
- 1997 Ford Ranger 4.0 V6 won't shift into drive after being driven. Takes longer than should to shift into drive when first started? It will go in reverse fine. First thing in the morning when I leave for work, it will shift into drive on it's own, but takes a bit longer than it should. After getting it warm, won't shift into drive at all. I can shift down to 1st or 2nd, then back into drive and it will "pop up" into drive within a second or 2. I also have a ODB2 error P1744 (Torque Converter circuit).