I replaced power steering pump in my 1994 ford f150 and now my steering wheel is hard to turn?
I replaced power steering pump in my 1994 ford f150 and now my steering wheel is hard to turn? - 1
Did you bleed the lines?
Why did you replace the pump?
HI so now it is the rack that needs to be replaced. This is the issue when dealing with old trucks and cars they need an endless supply of spare parts, so you might as well accept that fact. Or buy something newer.
- 1995 Ford Taurus with a steering issue. When I turn the steering wheel to a certain spot left or right it will start moving back and forth? According to previous owner the rack and pinion was previously replaced. Steering wheel Is off a little to the right. Any ideas?
- Why does my power steering pump squal when I turn? I have checked the fluid and it fine… It is a 2000 ford ranger with 4.0 V6 engine. It has a 3 inch body life and oversize mud tires… Would large tires cause it to whine? Or do I need to just change my pump?
- When changing the power steering pump on a KA (54) can you use PTFE tape to seal the pressure line from pump? I have changed the power steering pump on a ford KA (54) and when removing the pressure line from the pump there was some kind of seal on it but I don't know what it was, so I was hopping that PTFE tape would do the same job at sealing the thread. Any help please. Andy.
- Tie rod on a ford 150 ,year 1999.replaced it, inner and outer and now a month later and it is loose again. Why? Tie rod on a ford 150 , year 1999.replaced it, inner and outer and now a month later and it is loose again. Why?